View SBR140S3_1305409.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SBR140S3
Using state-of-the-art SBR IC process technology, the following features are made possible in a single device:
Major ratings and characteristics Values Characteristics
IF(AV) Rectangular Waveform VRRM VF@1A, TJ=75oC TJ (operating/storage) 1.0 * 40 0.42 -65 to 125
Units
A V V, typ o C
A B
MECHANICAL: * Molded Plastic SOD-323 package SOD-323
Cathode Mark G Di A H B C D Min 2.30 1.60 0.25 1.15 0.10 0.85 0.20 Max 2.70 1.80 0.40 1.45 0.18 1.05 0.10 0.40
*Note: Device monuted on a glass epoxy board, Board size: 50mm x 50m, Land size: 6mm x 6mm
ELECTRICAL: * Low Forward Voltage Drop * Low Reverse Leakage * Reliable High Temperature Operation * Super Barrier Design * Softest, fast switching capability o * 125 C Operating Junction Temperature
E F C D E F G H
All Dimensions in mm
Maximum Ratings and Electrical Characteristics (at 25oC unless otherwise specified)
SYMBOL DC Blocking Voltage Working Peak Reverse Voltage Peak Repetitive Reverse Voltage Average Rectified Forward Current (Rated VR - 20Khz Square Wave) - 50% duty cycle Peak Forward Surge Current - 1/2 60hz Instantaneous Forward Voltage o IF = 0.7A; TJ = 25 C IF = 1A; TJ = 25 C
o IF = 0.7A; TJ = 75 C o
UNITS 40 Volts
VRM VRWM VRRM IO (1) IFSM Typ --0.44 --Typ -----
1 18 Max 0.44 --0.39 Max 0.2 2 -65 to +125
Amps Amps
VF
Volts
Maximum Reverse Current at Rated VRM TJ = 25oC
o TJ = 75 C
IR (2) TJ
mA mA
o
Operating and Storage Junction Temperature
(2) Pulse width < 300 uS, Duty cycle < 2%
C
(1) We recommend that the worst case current be no greater than 80% of the maximum rating of I O
___________________________________________________________________________________________________ www.apdsemi.com Version 2.0 - April 2006 1
SBR140S3
10 If, Instantaneous Forward Current (Amps)
10
Tj= 125C
Ir, Reverse Current (mA)
1
Tj= 75C 0.1
1
Tj= 125C
0.01
Tj= 25C
Tj= 75C Tj= 25C
0.1 0.15
0.001 0 10 20 30 40
0.20
0.25
0.30
0.35
0.40
0.45
0.50
0.55
0.60
Vr, Reverse Voltage (Volts)
Vf, Instantaneous Forward Voltage (Volts)
Figure 1: Typical Reverse Current
Figure 2: Typical Forward Voltage
1
If, Average Forward Current (Amps)
0.5
0 0 25 50 75 100 125
Tc, Case Temp (C)
Figure 3: Current Derating, Case*
*Device mounted on a 50mm x 50mm glass epoxy board, 50% duty cycle
STANDARD SOLDERING PAD:
2.0 0.5 0.8
1.1
0.8 Unit: mm
APD SEMICONDUCTOR reserves the right to make changes without further notice to any products herein. APD SEMICONDUCTOR makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APD SEMICONDUCTOR assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in APD SEMICONDUCTOR data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. APD SEMICONDUCTOR does not convey any license under its patent rights nor the rights of others. APD SEMICONDUCTOR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APD SEMICONDUCTOR product could create a situation where personal injury or death may occur. Should Buyer purchase or use APD SEMICONDUCTOR products for any such unintended or unauthorized application, Buyer shall indemnify and hold APD SEMICONDUCTOR and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APD SEMICONDUCTOR was negligent regarding the design or manufacture of the part..
1 Lagoon Drive, Suite 410, Redwood City, CA 94065, USA Ph: 650 508 8896 FAX: 650 508 8865 Homepage: www.apdsemi.com email: info@apdsemi.com
___________________________________________________________________________________________________ www.apdsemi.com Version 2.0 - April 2006 2

▲Up To Search▲

Price & Availability of SBR140S3

	To Download SBR140S3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .